-
SIEMENS/MARELLI BDM (MPC5xx) adapter to be used with the BASE BOARD FOR BDM (MPC5xx) & JTAG (MPC5xxx). Suitable for:- Siemens SID803/201/202/206/301/MS45/PPD/MSV70/MSS80/etc..
- Marelli MJD+
-
DELPHI/MOTOROLA BDM (MPC5xx) adapter to be used with the BASE BOARD FOR BDM (MPC5xx) & JTAG (MPC5xxx). Standard BDM pinout (2.54mm). Suitable for:
- Delphi ECUs with MPC5xx MCUs (DCM3.x)
- Motorola ECUs with MPC5xx MCUs
-
MED9/EDC16/EDC7 BDM (MPC5xx) adapter to be used with the BASE BOARD FOR BDM (MPC5xx) & JTAG (MPC5xxx). Suitable for:
- MED9 ECUs
- EDC16 ECUs
- EDC7 ECUs
-
MARELLI JTAG (MPC55xx) adapter to be used with the BASE BOARD FOR BDM (MPC5xx) & JTAG (MPC5xxx). Suitable for:
- Marelli 7GF
- Marelli MJD 8DF
- Marelli MJD 8DS
- Marelli MJD 8F2
- Marelli MJD 8GMF
-
Universal frame adapter base for BDM (MPC5xx) & JTAG (MPC5xxx). *** Base board only: does NOT include any specific adapters. Suitable for the following adapters: Lower adapters can be rotated 0º, 90º,180º and 270º so that they better suit the different orientations of the debug port of the ECUs. Special care taken to the visibility, LEDs selected not just for their brightness but also correct hue, our adapter PCBs are white underneath to better reflect light and contribute to a crisper view of the working area. (To be used with the VF2 Flasher, suitable for standard 64mm wide frames, positioning frame not included)
-
UNIVERSAL FRAME KIT FOR BOSCH MED/EDC17 ECUS TO BE USED WITH THE TRICORE MODULE SET INCLUDES:
- 1x FRAME ADAPTER
- 1x BANANA POWER CABLES TO CONNECT TO THE VF2 FLASHER (GND,+12V,IGN)
- 3x PULL-DOWN SIGNALS
- 2x PULL-UP SIGNALS
- 2x GPT/PWD READ SIGNALS
- RST SIGNAL
- CONNECTOR FOR LED ILLUMINATION
-
Generic frame adapter for ECUs which use SH725xx MCUs with 13x2 debug connector (ETAS). Lower adapter can be rotated 0º, 90º,180º and 270º so that they better suit the different orientations of the debug port of the ECUs. Special care taken to the visibility, LEDs selected not just for their brightness but also correct hue, our adapter PCBs are white underneath to better reflect light and contribute to a crisper view of the working area. (To be used with the VF2 Flasher, suitable for 64mm wide frames, positioning frame not included)
-
FRAME ADAPTER FOR DELPHI DCM3.7 (SH725xx JTAG module). (TO BE USED WITH THE VF2 FLASHER, POSITIONING FRAME NOT INCLUDED)
-
Sale!Full set JTAG adapter for Marelli ECUs + BDM frame adapter kit (MPC5xx) Set includes:
- 1x Universal frame adapter base board (BDM & JTAG)
- 1x MED9/EDC16/EDC7 adapter for BDM/JTAG base board (BDM MPC5xx module)
- 1x Siemens/Marelli adapter for BDM/JTAG base board (BDM MPC5xx module)
- 1x Delphi/Motorola adapter for BDM/JTAG base board (BDM MPC5xx module)
- 1x Marelli JTAG adapter for BDM/JTAG base board(JTAG MPC5xxx module)
-
Sale!Out of stockFull set of all available frame adapters and cables to be used with the VF2 Flasher Set includes:
- 1x Universal Frame Kit For Bosch M/EDC17 (Tricore Module)
- 1x GPT/F-Series Cable (Tricore Module)
- 1x Toyota/Scion/Lexus frame adapter for ECUs with 10x2 debug header (NBD_76F module)
- 1x Toyota/Scion/Lexus frame adapter for ECUs with 13x2 debug header (NBD_76F module)
- 1x Universal frame adapter base board (BDM & JTAG)
- 1x MED9/EDC16/EDC7 adapter for BDM/JTAG base board (BDM MPC5xx module)
- 1x Siemens/Marelli adapter for BDM/JTAG base board (BDM MPC5xx module)
- 1x Delphi/Motorola adapter for BDM/JTAG base board (BDM MPC5xx module)
- 1x Marelli JTAG adapter for BDM/JTAG base board(JTAG MPC5xxx module)
- 1x Frame adapter for Delphi DCM3.7 (SH725xx JTAG module)
- 1x ETAS frame adapter (SH725xx JTAG module)
-
VF2 Flasher MASTER package: all modules, protocols and tooling sold separately. ** For a FULL version which includes all the modules/protocols check this listing. A MASTER tool always reads/writes plain files(.BIN/.ORI). Package includes:
- VF2 Flasher tool MASTER
- Power adapter with EU cord (also available as spares)
- Set of flexible banana cables and blue boot pen (also available as spares)
- Regular IDC16 (also available as spares)
- Multicolored IDC16 (also available as spares)
- IDC16-IDC10 flat cable adapter
- Set of 5 soldering BDM adapters (also available as spares)
- GPT Cable for MEDC16 BENCH / MEDC17 BENCH (also available as spares)
- VF2 Flasher OBD cable (also available as spares)
- USB cable type A to type B, 1m
- ESD protective shielding bag
- VF2 Flasher plastic protective foam padded case
- One year of technical support
- One year of updates
-
VF2 Flasher package MASTER FULL version with all the available JTAG/BDM/AUD/NBD/BSL/BOOT modules as well as OBD and BENCH protocols included. A MASTER tool always reads/writes plain files(.BIN/.ORI). An unlimited number of SUB/SLAVE tools can be linked to it to form a tuning network. Package includes:
- VF2 Flasher tool MASTER
- Power adapter with EU cord (also available as spares)
- Set of flexible banana cables and blue boot pen (also available as spares)
- Regular IDC16 (also available as spares)
- Multicolored IDC16 (also available as spares)
- IDC16-IDC10 flat cable adapter
- Set of 5 soldering BDM adapters (also available as spares)
- GPT Cable for MEDC16 BENCH / MEDC17 BENCH (also available as spares)
- VF2 Flasher OBD cable (also available as spares)
- USB cable type A to type B, 1m
- ESD protective shielding bag
- VF2 Flasher plastic protective foam padded case
- OBD + BENCH ECUS & TCUS
- NEC 76F00xx (NBD) [Toyota/Scion/Lexus/Hino]
- SH725xx (JTAG)
- TRICORE TC17xx (BSL) + PWD READ
- MPC5xxx NEXUS (JTAG)
- SH705x (AUD/BSL)
- MPC5xx (BDM)
- MH7x/MH8x (BSL)
- M32R/ECU (BSL/SPI)
- MC68000 (BDM)
- C167 (BSL)
- ST10F (BSL)
- One year of technical support
- One year of updates
